H3C S7500E Series Command Reference Manual page 44

--------------------------------------------------------------------------
Announce :0
DelayReq :0
PdelayReq:0
Table 7 Command output
Field
Name
Role
Delay-mech
Clock-step
Port-enable
Asym-corr
Device configuration information
PTP mode
Domain value
Slave only
BMC run info
Grandmaster clock ID
Step removed
Parent clock ID
Receive port name
Parent portnumber
Discarded packet statistics
Sync :0
DelayResp :0
PdelayResp:0
Description
PTP port name.
PTP port role:
•
Master—Master port.
•
Slave—Subordinate port.
•
Passive—Passive port.
Delay measurement mechanism:
•
E2E—Request_Response mechanism used by E2ETC.
•
P2P—Peer Delay mechanism used by P2PTC.
Mode for carrying timestamps:
•
Two—Two-step mode.
PTP status of the port:
•
Enabled.
•
Disabled.
Delay-correction value, in nanoseconds.
PTP device configuration information.
Clock node type:
•
BC.
•
E2ETC.
•
E2ETC-OC.
•
OC.
•
P2PTC.
•
P2PTC-OC.
PTP domain value. It is always 0.
Whether the working mode of an OC is slave-only:
•
Yes.
•
No.
BMC operation information.
Grandmaster clock (GM) ID.
Hops from the GM to the local clock node.
Parent clock ID.
Receiving port of the GM.
Sending port of the parent clock node.
33
Signaling
FollowUp
PdelayRespFollowUp :0
:0
:0