H3C S7500E Series Command Reference Manual page 27

Field
peer mode
peer poll
offset
delay
disper
root delay
root disper
reach
sync dist
sync state
precision
version
peer interface
reftime
orgtime
rcvtime
xmttime
filter delay
filter offset
filter disper
Description
Operation mode of the peer device:
•
unspec—The mode is unspecified.
•
active—Active mode.
•
passive—Passive mode.
•
client—Client mode.
•
server—Server mode.
•
bdcast—Broadcast server mode.
•
control—Control query mode.
•
private—Private message mode.
Poll interval of the peer device, in seconds. The value displayed is a
power of 2. For example, if the displayed value is 6, the poll interval
of the local device is 2 , or 64 seconds.
6
Offset of the system clock relative to the reference clock, in
milliseconds.
Roundtrip delay from the local device to the clock source, in
milliseconds.
Maximum error of the system clock relative to the reference clock.
Roundtrip delay from the local device to the primary reference
source, in milliseconds.
Maximum error of the system clock relative to the primary reference
clock, in milliseconds.
Reachability count of the clock source. 0 indicates that the clock
source is unreachable.
Synchronization distance relative to the upper-level clock, in
seconds, calculated from dispersion and roundtrip delay values.
State of the state machine.
Displayed value is an integer that is in the range of 0 to 5.
Precision of the system clock.
NTP version.
Displayed value is an integer that is in the range of 1 to 3.
Source interface.
If the source interface is not specified, this field is wildcard.
Reference timestamp in the NTP message.
Originate timestamp in the NTP message.
Receive timestamp in the NTP message.
Transmit timestamp in the NTP message.
Delay information.
Offset information.
Dispersion information.
16