Display Poe-Power - H3C S7500E Series Command Reference Manual

Examples
# Display power information for PoE interfaces connected with PSE 7.
<Sysname> display poe pse 7 interface power
Interface
GE1/0/25
GE1/0/26
GE1/0/27
GE1/0/28
GE1/0/29
GE1/0/30
--- 3 port(s) on,
Table 64 Command output
Field
Interface
CurPower
PeakPower
MaxPower
PD Description
port(s) on
consumed
Remaining

display poe-power

Use display poe-power to display information about external PoE power supplies.
Syntax
In standalone mode:
display poe-power [ | { begin | exclude | include } regular-expression ]
In IRF mode:
display poe-power [ chassis chassis-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
CurPower PeakPower MaxPower
(W) (W)
4.4 4.5
4.4 4.5
15.0 15.3
0.0 0.0
0.0 0.0
0.0 0.0
23.8(W) consumed,
PD Description
(W)
4.6 IP Phone on Room 309 for Peter Smith....
15.4 IP Phone on Room 409 for Peter Pan
15.4 Acess Point on Room 509 for Peter
5.0 IP Phone on Room 609 for Peter John....
4.0 IP Phone on Room 709 for Jack
5.0 IP Phone on Room 809 for Alien
13.2(W) Remaining ---
Description
Shortened form of a PoE interface.
Current power of a PoE interface.
Peak power of a PoE interface.
Maximum power of a PoE interface.
Description of the PD connected with a PoE interface.
When the description contains more than 34
characters, the first 30 characters followed by four
dots are displayed.
Number of PoE interfaces that are supplying power.
Power currently consumed by all PoE interfaces.
Remaining power on the PSE.
188