Display Info-Center - H3C S7500E Series Command Reference Manual

Examples
# Display information about channel 0.
<Sysname> display channel 0
channel number:0, channel name:console
MODU_ID NAME
ffff0000 default
The output shows that the system is allowed to output log information with a severity from 0 to 4, trap
information with a severity from 0 to 7, and debug information with a severity from 0 to 7 to the console.
The information source modules are all modules (default).
Table 12 Command output
Field
channel number
channel name
MODU_ID
NAME
ENABLE
LOG_LEVEL
ENABLE
TRAP_LEVEL
ENABLE
DEBUG_LEVEL

display info-center

Use display info-center to display information center configuration information.
Syntax
display info-center [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
ENABLE LOG_LEVEL
Y informational
Description
Channel number in the range 0 to 9.
Channel name. For more information, see info-center channel name.
ID of the source module.
Name of the source module.
"default" means all modules are allowed to output system information.
Indicates whether log output is enabled, Y or N.
Log information severity. See
Indicates whether trap output is enabled.
Trap information severity. See
Indicates whether debug output is enabled.
Debug information severity. See
ENABLE TRAP_LEVEL
Y debugging
Table 14
Table 14
Table 14
52
ENABLE DEBUG_LEVEL
Y debugging
for details.
for details.
for details.