Setting System Parameters; Setting Protection Parameters; Modifying Password - Sungrow SG1100UD-MV System Manual

8 WEB Operation
step 2 Select a device in the left device list in the function display area. Click "Operation Para-
meters" on the right. enter a value in "Current Value", and then click "Settings"
Click "Configure Synchronization"to synchronize the settings to other devices
of the same type.
- - End

8.4.7 Setting System Parameters

step 1 Click "Device Monitoring" in the left navigation bar.
step 2 Select a device in the left device list in the function display area. Click "System
Parameters" on the right. enter a value in "Current Value", and then click "Settings"
Click "Configure Synchronization"to synchronize the settings to other devices
of the same type.
- - End

8.4.8 Setting Protection Parameters

step 1 Click "Monitoring" in the left navigation bar.
step 2 Select a device in the left device list in the function display area. Click "Protection Para-
meters" on the right. enter a value in "Current Value", and then click "Settings"
Click "Configure Synchronization"to synchronize the settings to other devices
of the same type
- - End
8.5

Modifying Password

PC
Click in the upper-right corner of the interface, select Modify Password, enter the origi-
nal password and new password, and click Save.
Mobile Device
Through the PC interface, select System → WLAN → Password, delete the original pass-
word, and enter the new password, click Save to complete the password modification.
The password should be a combination of 6 to 32 letters and digits.
Reconnect and log in after password change.
56
System Manual