Delivery Contents; Storage Of Inverter - Sungrow SG50KTL-M-20 User Manual

4 Unpacking and Storage

4.3 Delivery Contents

*Images shown here is for reference only! Actual product you receive may differ.
Item Name
A Inverter unit
B Backplate
C Documents
D Fastener set
E Fix screws
DC
F
connectors
Cable
G
protection

4.4 Storage of Inverter

Store the inverter properly when the inverter is not to be installed immediately.
Sungrow shall hold no liability for the corrosion of the device or the failure of device
internal components caused by storage of the device not following the
requirements specified in this manual. Inverter must be packed into its original
carton with the desiccant bags inside.

Inverter must be packed into its original carton with the desiccant bags inside.

Seal the packing carton with adhesive tape.

Store the inverter in a dry and clean place to protect it against dust and moisture.
18
Fig. 4-3 Delivery Contents
Description
---
It is used for mounting inverter onto the wall.
Documents include quality certificate, packing list, product
test report, and quick user manual.
Six units. It is used for fastening backplate onto metal frame.
2 M4×16 screws for fix the inverter to the backplate.
Twelve pairs. PV input cables must be equipped with the
connector.
One to be used to replace the original AC cable protection
when the external diameter of the AC cable you selected is
between 30.5—40mm
User Manual