Introduction - Ingeteam INGECON SUN STORAGE 1Play Technical Manual

1 Introduction

This document describes the process to configure the INGECON SUN STORAGE 1Play 3TL / 6TL
(hereinafter, ISS 1Play) to work with BYD B-BOX H5.1 and H6.4 battery (4-5 modules).
The BYD HV and ISS 1Play equipment can be used in the following type of single phase installations:
Stand-alone installations
UPS(Back-up) installations
Self-consumption/Grid Support installations
The minimum FW versions to work with the ISS 1Play and BYD B-BOX HV are the following:
Minimum Firmware Version used in the BYD B-Box HV:
V3.012R
The battery FW version can be found on the BYD webpage. For further details, check the "Installation Manual
of BYD HV".
https://www.eft-systems.de
Minimum Firmware Version used in the ISS 1Play:
Inverter: ABH1002_Y
Display: ABH1003_P
The inverter FW versions can be found at the display or via the "Ingecon Sun Manager" software:
Using Ingecon Sun Manager:
The firmware version is indicated underneath the inverter serial number.
Using the Display:
For further details, check the "Installation and Operation Manual".
In order to know the firmware version from the inverter or the display, the user should check the last two
characters from the given firmware code. This two characters are arranged in alphabetical order.
For example, the firmware code ABH1002_U represents a U version, and the ABH1002AC code represents
an AC version. In this particular case, the AC version is more updated than the U version.
The inverter and the display should be updated to the latest available firmware version that can be found at
www.ingeteam.com.
Technical Guide
MAIN MENU > MONITORING > FIRMWARE MONIT
11/04/2019
INGECON SUN STORAGE 1Play
3/8