1MRS759118 A
5.11
REX640
Operation Manual
Showing parameters
Some function blocks have a function-specific ON/OFF setting. When the function
setting is "off", all settings are hidden and when the function setting is "on", all settings
are visible based on the other visibility and hiding rules.
Switch a function block on or off via the Operation parameter under
the function block.
The values "Basic" or "Advanced" of the Setting visibility parameter
in Configuration/HMI have no effect on the Parameter List page.
This page has its own Basic settings option which can be used to hide
or show the advanced settings on the Parameter List page.
1.
Select Import/Export on the menu bar.
2.
Select Parameter List from the drop-down list.
GUID-FA2C4E64-B088-483A-819B-0502911D1592 V1 EN
Figure 54:
Displaying parameters
3.
Click the filter icon
4.
In the Apply filter dialog, select the settings that should be shown and click
Apply.
If nothing is selected, all settings are shown.
.
Section 5
Using Web HMI
67