ABB RELION REX640 Operation Manual page 126

Section 7
Commissioning
120
3.1. Tap the module on the page to open the module-specific page.
3.2. Tap
or to scroll over the different modules.
3.3. On the BIO module specific page, select On or Off for the selected channel
and tap Simulate.
3.4. On the AIM/SIM module specific page, select Primary or Secondary for
Simulation Unit, set the simulation signal value for a channel and tap
Simulate.
GUID-8870A02D-9C18-44B2-8410-85DEB62E0525 V1 EN
Figure 102: Simulating digital inputs of selected module
GUID-FF9D44A8-3801-4C35-B5F4-27280D1D5A01 V1 EN
Figure 103: Simulating analog inputs of selected module
1MRS759118 A
REX640
Operation Manual