5.2 Parts Lists; Ordering Information; Factory S?Zr\ Jice - Keithley 7071 Instruction Manual

SECTION 5
Replaceable Parts
5.1 INTRODUCTION
This section contains a list of replaceable electrical and
mechanical parts for the Model 707I, as well as a compo-
nent layout drawing and
schematic
diagram of the matrix
card.
5.2 PARTS LISTS
Electrical parts are listed in order of circuit designation in
Table 5-l. Table 5-2 summarizes miscellaneous parts.
5.3 ORDERING INFORMATION
To place a parts order, or to obtain information concern-
ing replacement parts, contact your Keithley representative
or the factory (see
the
inside front cover for addresses).
When ordering parts, be sure to include the following
information:
1. Matrix card model number (7071)
2. Card serial number
3. Part description
4. Circuit description, if applicable
5. Keithley part number
5.4 FACTORY SERVICE
If the matrix card
is to be
returned to Keithley Instruments
for repair, perform the following:
1. Complete the service form at
the
back of this manual
and include it with the card.
2. Carefully pack the card in the original packing carton.
3. Write ATTENTION REPAIR DEPT on the shipping label.
Note: It is not necessary to return the matrix mainframe
with the card.
5.5 COMPONENT LAYOUT AND SCHEMATIC
DIAGRAM
Figure 5-l
shows
a component layout of the Model 7071,
while Figure 5-2 shows a schematic diagram.
5-115-2