Advertisement
2.3. Precaution
Before proceed, make sure touch a safely grounded object or metal object before touching
the device.
Please follow below chapter for installation operations
2.4. PCI/PCIE
Turn off PC/notebook and remove power cord from AC plug/sockets on the wall.
Remove notebook battery.
After make sure the system is fully shut down, open the chassis.
Unpack the device package and make sure don't touch any electrical and
semiconductor components on the device, especially ICs on board.
Install PCI/PCIE card to available motherboard PCI/PCIE slot and fasten the screw on the
device and back plate.
Close the chassis and connect signal source to the device.
Turn on the system.
3. SOFTWARE INSTALLATION
3.1. Support OS
Windows based system
Linux based system
3.2. Driver Installation
After install the device and reboot the PC/notebook, the "Windows Found New Hardware
Wizard" will appear and detect the device. Please click "Cancel" to exit the Wizard, and
Wrist strap
Linux 2.6.14 or Higher
Windows XP
Windows Vista
Windows 7
Windows 8/8.1
Windows 10
Support
Support
Support
Support
Support
Support
6
6/7
Advertisement
