Power Save Option; System Information - INNO Instrument View 8+ User Manual

User's Manual
INNO Instrument, Inc.

Power Save Option

This function is important for power conservation. If the power saving function is not
set during battery pack use, the number of splice cycles will decrease.
(1) Insert a power unit and turn on the splicer.
(2) Select [Power Save Option] in [System Setting] menu.
(3) Change value of [Monitor Shut Down] and [Splicer Shut Down]
Parameter
Monitor Shut Down
Splicer Shut Down

System Information

After selecting [System Information], the following messages will be shown on the
screen:
Parameter
Machine Serial NO. Display the fusion splicer' s serial number.
Software Version
FPGA
Total Arc Count
Current Arc Count
Last Maintenance
Production Date
PAGE
36
To avoid power loss when battery is used, setting this
function turns off the power supply to the LCD monitor if
the splicer does not operate after a certain period of time.
When the power supply for monitor turns off, the LED near
the power key [ ]blinks. Press any key to turn on the LCD
monitor.
Automatically turns off the power supply of the splicer if it
performs no operation for a long period of time. The function
serves to prevent the battery capacity from running low.
Display the fusion splicer' s software version.
Display FPGA' s version.
Display total arc discharge count.
Display arc discharge count after electrode change. The
parameters will be zero cleared or reset after replacing
electrodes.
Display maintenance date at last time.
Display the date of production of the machine.
Description
Description