Delete Heat Mode; Heater Mode Parameters - INNO Instrument View 8+ User Manual

User's Manual
INNO Instrument, Inc.

Delete Heat Mode

① Select [Heater Mode] menu.
② Select [Delete Heat Mode].
③ Select the heat mode to be
deleted
Note: The gray modes (20mm, 30mm) are the system preset
initial heat modes which cannot be deleted
Heat Mode Parameters
Parameter
Template
Name
Note
Heater temperature Sets heating temperature.
Heater time
Preheat
temperature
PAGE
26
Set sleeve type. List of all heat modes are displayed.
Selected mode will be copied to a user-programmable area.
Title for a heat mode.
Title of the heat mode displayed in the upper right corner of
the monitor during splicing or heating process. Max number
of characters used is 5.
Sets heating time from the beginning to the heating
completed.
Sets preheat temperature of the heater.
③ Select the parameters to be
edited.
Description