Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
STEP 3
- Remove the pre-assembled 6 Allen head bolts (57) and 2 curve washers (58) and
4 flat washer (41) from the main frame (1).
- Connect the middle section sensor wire (61) of the front post (59) and front cover (38) with
the lower section sensor wire (62) securely. Put the front post (59) and front cover (38) into the
bottom post of main frame (1) and fasten with 6 Allen head bolts (57), 2 curve washers (58) and
flat washer (41).Please note don't tighten all head bolts (57) too much at the beginning. When all
parts are fixed already, and then fasten each one piece tightly.
ELITE ULTRA SL EXERCYCLE ASSEMBLY MANUAL
9
Hide quick links:
Advertisement
Table of Contents
