Elite Fitness Slimline Series Assembly Manual page 8

ASSEMBLY INSTRUCTIONS
STEP 2
- Remove the pre-assembled nylon nuts (46) and flat washer (41) from back of the seat (28).
Fix the seat (28) with the top seat sliding bracket (27) and fasten with nylon nut (46) and
flat washer (41).
- Remove the pre-assembled M10 knob (24) and flat washer (64) from back of the seat sliding
bracket (27). Fix the seat sliding bracket (27) with the top bracket of seat tube (23) and fasten with
M10 knob (24) and flat washer (64).
- Attach seat tube (23) into the main frame (1) and secure in right position with the seat post quick
release knob (19). Adjust the height of seat by choosing the hole of seat tube.
NOTE: DO NOT pull out the seat tube over the warning line MAX which showing on the tube .
When you adjustable the height of seat.
- Assemble each pedal (18R&26L) to the crank. Pedal assemble with crank right side , Pedal
assemble with crank left side: See the mark "R" & "L" (right and left) on the pedals (18R&26L) and
crank.
NOTE: The right pedal "R" should be threaded on clockwise. The left pedal "L" should be threaded
on counter-clockwise.
- Attach the pedal straps to the pedals (18R&26L).
NOTE: Adjust the pedal straps to meet your foot/shoes size by 4 adjustable holes.
8