Advertisement

Quick Links

LILIN Ultra, S and ZS series IVS Camera User Manual
Chapter 1 IVS Features ................................................................................................................. 2
1.1 The following situations IVS might not work ........................................................................ 2
1.2 The Border of Non-detection Area ........................................................................................ 2
1.3 IVS Setting ................................................................................................................................ 2
Chapter 2 Instruction for IVS Features ........................................................................................ 3
2.1 Motion Detection ...................................................................................................................... 3
2.1.1 Motion Detection Configuration .......................................................................................... 3
2.2 Tampering Detection ............................................................................................................... 4
2.2.1 Tampering Detection Configuration ................................................................................... 4
2.3 Tripwire ...................................................................................................................................... 5
2.3.1 Tripwire Configuration .......................................................................................................... 5
2.4 Traffic Light Detection (Semaphore + Tripwire Detection) ................................................ 6
2.4.1 Traffic Light Detection Configuration ................................................................................. 6
2.5 Object Counting ........................................................................................................................ 7
2.5.1 Object Counting Configuration ........................................................................................... 7
2.6 Unattended Object Detection (Object Left Detection) ........................................................ 8
2.6.1 Unattended Object Detection Configuration ..................................................................... 8
2.7 Missing Object Detection (Object Remove Detection) ....................................................... 9
2.7.1 Missing Object Detection Configuration ............................................................................ 9
2.8 Crowd Detection (Density Detection) .................................................................................. 10
2.8.1 Crowd Detection Configuration ........................................................................................ 10
2.9 Loitering Detection ................................................................................................................. 11
2.9.1 Loitering Detection Configuration ..................................................................................... 12
2.10 Face Detection ..................................................................................................................... 13
2.10.1 Face Detection Configuration ......................................................................................... 13
2.11 Audio Detection .................................................................................................................... 14
2.11.1 Audio Detection Configuration ........................................................................................ 14
Appendix ........................................................................................................................................ 16
1
66-UM-IVSCAM-CSE-1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ultra Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lilin Ultra Series

  • Page 1: Table Of Contents

    LILIN Ultra, S and ZS series IVS Camera User Manual Chapter 1 IVS Features ......................... 2 1.1 The following situations IVS might not work ................ 2 1.2 The Border of Non-detection Area ..................2 1.3 IVS Setting ..........................2 Chapter 2 Instruction for IVS Features ..................3 2.1 Motion Detection ........................
  • Page 2: Chapter 1 Ivs Features

    Chapter 1 IVS Features 1.1 The following situations IVS might not work ⚫ In the rainy day, the rain drops block the FOV for the detected objects. ⚫ In the foggy environment, the fog blocks the detected objects. ⚫ The reflection caused by sunshine and mirror ⚫...
  • Page 3: Chapter 2 Instruction For Ivs Features

    Note: LILIN Ultra and S series IVS use advance motion detection technology that is to change the way motion detection is handled by the camera. With a four-pass filter for separating motion objects, this results in a more accurate motion detection algorithm, lowering false alarms and other recording triggers.
  • Page 4: Tampering Detection

    2.2 Tampering Detection An alarm is triggered automatically when the camera detects if someone attempts to cover, vandalize or move the lens. 2.2.1 Tampering Detection Configuration To setup Tampering Detection on the camera, follow the steps below: ⚫ Click on IVS tab on the left. ⚫...
  • Page 5: Tripwire

    2.3 Tripwire Tripwire allows up to 8 lines or rectangles to be drawn within a camera image, movement from either direction across this line will trigger a motion detection alarm. 2.3.1 Tripwire Configuration To setup Tripwire on the camera, follow the steps below: ⚫...
  • Page 6: Traffic Light Detection (Semaphore + Tripwire Detection)

    2.4 Traffic Light Detection (Semaphore + Tripwire Detection) Create alarms when up to 8 tripwire lines are crossed when a specified colour is shown in your chosen area. Below is an example of tripwires becoming active when the traffic lights turn to red (as this is where the specified box is) 2.4.1 Traffic Light Detection Configuration To setup Traffic Light on the camera, follow the steps below:...
  • Page 7: Object Counting

    2.5 Object Counting Count the number of objects entering or exiting an area over a specific duration. A virtual area can be drawn over a camera image with anything passing through the virtual area being logged and counted. A record of how many times this area has been crossed is then accessible from the camera's menu.
  • Page 8: Unattended Object Detection (Object Left Detection)

    2.6 Unattended Object Detection (Object Left Detection) Detect a left object. This can be used for detecting an unattended object or a parking violation. When an object gets left, a red block gets showed. 2.6.1 Unattended Object Detection Configuration To setup unattended object detection, follow the steps below: ⚫...
  • Page 9: Missing Object Detection (Object Remove Detection)

    Note: Relearn background could avoid false alarms. Strongly recommend to click the Submit button, if the camera field of view gets changed. 2.7 Missing Object Detection (Object Remove Detection) Detect a removed object. This can be used for monitoring an object missing in a museum or finding a parking space.
  • Page 10: Crowd Detection (Density Detection)

    Note: Relearn background could avoid false alarms. Strongly recommend to click the Submit button, if the camera field of view gets changed. 2.8 Crowd Detection (Density Detection) Detect number of moving people or objects exceeding a certain quantity, and fire warning alarm.
  • Page 11: Loitering Detection

    ⚫ Click on IVS Setting tab on the left. ⚫ Select one Camera View according to what camera mounting. (Horizontally is for tabletop, Angle and Overhead is for ceiling mount) ⚫ Define Min. & Max. width and height for the detected object size. ⚫...
  • Page 12: Loitering Detection Configuration

    2.9.1 Loitering Detection Configuration To setup Loiter Detection, follow the steps below: ⚫ Click on IVS tab on the left. ⚫ Select Loiter Detection and click Submit button to save the changes. ⚫ Click Loiter Detection tab. ⚫ Click Edit button and choose Enable. ⚫...
  • Page 13: Face Detection

    2.10 Face Detection When a human face is recognized, LILIN cameras can send alerts or customer notifications. 2.10.1 Face Detection Configuration To setup Face Detection on the camera, follow the steps below: ⚫ Click on IVS tab on the left.
  • Page 14: Audio Detection

    There are up to 4 faces that can be detected at same time. 2.11 Audio Detection An alarm is triggered when ambient sound exceeds predetermined levels. An example is a camera in a child/baby room acting as a monitor. 2.11.1 Audio Detection Configuration To setup Audio Detection, follow the steps below: ⚫...
  • Page 15 IVS 1.0: Available on S Series cameras serial number 1702*** earlier models cannot be updated. IVS 2.0: LILIN UH 4K, UF 120FPS, and ZH series are shipped with IVS 2.0 (firmware 2.7.xx) started on 12/4/2017. LILIN S and ZS series are shipped with IVS 2.0 (firmware 2.7.xx) started on serial 1712*** (12/4/2017).
  • Page 16: Appendix

    Appendix Features UH,UF, S, ZS Pro & Z M (4 digit) & ZM M (3 digits) Face detection Tampering detection Audio detection Tripwire Zone entering Object counting Up to 32 objects Up to 1 to 2 object Up to 1 to 2 object Traffic light detection Face detection Missing object detection...

Table of Contents