Balluff BTL6-V11V Series Configuration Manual page 34

BTL6-V11V-...
Configuration
5
Software example in LASAL CLASS 2 & LASAL SCREEN (continued)
Add BTL text
►
Right click the recently created display element and
select "Variable Text > Server Name".
⇒
Visualization of the BTL position is now complete.
Fig. 5-12: Add BTL text
Connect the target system
A VARAN ETV 0811 touch panel is used as the target
system in this description.
A Crosslink Ethernet cable is required for direct
connections between a PC and touch panel.
1. Connect a Crosslink Ethernet cable to the Ethernet
port of the computer.
2. Connect the other cable end to the Ethernet port of the
touch panel.
⇒
The touch panel's IP address (e.g. 10.10.150.1)
can be seen on the display of the activated touch
panel.
14 english