Other Operations
Other Operations
This section explains how to initialize the network settings and how to set up your printer and computer
to use DHCP.
Initializing Network Settings
Note
● This procedure initializes all the network settings.
1
Press the <ENTER> button.
2
to select [Admin Setup] and
Press
then press the <ENTER> button.
3
Enter the administrator password using
the numeric keypad.
The factory default administrator password is
5
"999999".
4
Press the <ENTER> button.
5
Make sure that [Network Setup] is
selected and then press the <ENTER>
button.
6
Press
to select [Network Factory
Defaults] and then press the <ENTER>
button.
7
Make sure that [Execute] is selected
and then press the <ENTER> button.
The network settings are initialized.
- 72 -