Printing On Labels - Oki Pro8432WT User Manual

Memo
1
● This section uses [MemoPad] for its Windows
explanations, and [TextEditor] for its OS X explanations.
Descriptions may differ depending on the applications and
printer drivers used.
● If setting details are not displayed in the print dialog
box for OS X, click [Show Details] at the bottom of the
dialog box.
Reference
● For detailed explanations of the printer driver setup items,
see the printer driver "Online Help".

Printing on Labels

You can print on labels by changing the media
type setting and using the MP tray and the
faceup stacker.
Set the paper size and type for MP tray on
the operator panel. Then, make print settings
including paper size and paper tray with the
printer driver.
Reference
● For available labels, refer to the User's Manual (Setup).
● Manual printing is also available for printing on labels.
For details on manual printing, refer to
P.13.
1
Load paper on the MP tray.
Reference
● Refer to "Loading Paper" in the User's Manual
(Setup).
2
Open the faceup stacker at the rear of
the printer.
Memo
● If always printing on labels from the MP tray, register
the paper on the operator panel. If printing once,
proceed to the printing procedures through the
printer driver.
3
Press the <Fn> key.
4 Press the <9> and <0> on the numeric
keypad and then press the <ENTER>
button.
5 Press the scroll button
[A4] or [Letter] and then press the
<ENTER> button.
6
Press the <BACK> button and make
sure that [MPTray Config] is displayed.
7
Press the scroll button
[Media Type] and then press the
<ENTER> button.
8 Press the scroll button
[Labels] and then press the <ENTER>
button.
9
Press the <ON LINE> button to exit the
menu mode.
10
Open the file you want to print on the
computer.
11
Configure the paper size and tray on the
printer driver.
- 10 -
"Manual Printing"
to select
to select
to select the