Emphasizing Fine Lines; Auto Tray Selection - Oki Pro8432WT User Manual

Emphasizing Fine Lines

1
You can print fine lines and small characters
clearer.
With some applications, if this function is turned
on, the spaces in bar codes may become too
narrow. If this happens, turn off this function.
Memo
● This function is turned on by default.
For Windows PS Printer Driver
1
Open the file you want to print.
2 From the [File] menu, select [Print].
3
Click [Preferences] or [Properties].
4 Select the [Job Options] tab.
5 Click the [Advanced].
6
Select the [Adjust ultra fine lines]
check box and then click [OK].
7
Configure other settings if necessary and
then start printing.
For OS X PS Printer Driver
1 Open the file you want to print.
2
From the [File] menu, select [Print].
3 Select [Print Options] from the panel
menu.
4 Click the [Quality1] button from [Print
Options].
5
Select the [Adjust ultra fine lines]
check box.
6
Configure other settings if necessary and
then start printing.
Memo
● If setting details are not displayed in the print dialog
box for OS X, click [Show Details] at the bottom of the
dialog box.

Auto Tray Selection

You can set in the printer driver to automatically
switch paper feed trays with the same size of
paper loaded.
First, set on the operator panel for the MP tray
to be available for auto selection. Then, set the
auto selection of the tray with the printer driver.
Note
● Make sure to set a paper size for Tray1 and MP tray.
Available paper size differs depending on each tray. For
details, refer to the User's Manual (Setup).
Memo
● In the default settings, the [Tray Usage] is [Do Not
Use]. When at default settings, the MP tray is not
supported by the auto tray switching function.
1 Press the <Fn> key.
Memo
● When a printer is in the power saving mode, press
the <POWER SAVE> button to restore from the
mode.
2
Press the <9> and <5> on the numeric
keypad and then press the <ENTER>
button.
3
Press the scroll button
[Normal Tray] and then press the
<ENTER> button.
4 Press the <ON LINE> button to exit the
menu mode.
5
Specify a paper tray in the printer driver
and start printing.
For Windows PS Printer Driver
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3
Click [Preferences] or [Properties].
4
Select the [Paper/Quality] tab.
5 Select [Automatically Select] from
[Paper Source].
6
Configure other settings if necessary and
then start printing.
- 20 -
to select