Oki Pro8432WT User Manual page 62

Changing Network Settings From the Web Page
Periodic Alerts
1
Access the printer's web page and log in
as the administrator.
2 Select [Admin Setup].
3
Select [Network] > [E-mail] > [Alert
Settings].
4
Enter an e-mail address in the [Address]
of [Alert Settings], to receive the alerts.
5 Click [Setting] for the specified address.
[Copy] is useful when you want to apply the alert
conditions to another address.
6 Follow the on-screen instructions to
specify detailed settings.
5
7
Click [OK].
8 Click [View a summary of current
configuration] to check the current
settings, and then click [X] to close the
window.
You can also check the current settings of up to
two addresses on the main window. Select the
desired addresses to check from the list box.
9 Click [Submit].
The network card reboots to enable the new
settings.
Memo
● Alert e-mail will not be sent if errors to notify about have
not occurred.
Alert When Error Occurs
1
Perform steps 1 to 6 in
P.62.
When an error or warning requiring notification is
selected, a window will display to specify the time
between error occurrence and sending the alert.
2 Specify the time before sending error
alerts and then click [OK].
If you specify a longer time, you are only notified
of persisting errors.
3
Click [OK].
"Periodic Alerts"
- 62 -
4 Click [View a summary of current
configuration] to check the current
settings, and then click [X] to close the
window.
You can also check the current settings of up to
two addresses on the main window. Select the
desired addresses to check from the list box.
5 Click [Submit].
The network card reboots to enable the new
settings.