Oki Pro8432WT User Manual page 44

Changing the Equipment Settings
Time Setup
(cont.)
3
Power Setup
Tray Setup
Others Setup
Item
Daylight Saving
Setting method
SNTP Server (Primary)
SNTP Server (Secondary)
Time Setting
Auto Power Off
Unit of Measurement
Default Paper Size
RAM Setup Receive
Buffer Size
Resource
Save
Flash Initialize
Memory
Setup
SD Card This item is displayed only if the SD card (option) is installed.
Setup
Initialize
* Only when
the SD card is
installed Format
Partition
Erase SD
Card
Settings
On Enables/Disables daylight saving setting.
Off
Auto Setup Sets the time setting method.
Manual Setup
xxx.xxx.xxx.xxx Sets the SNTP server (primary)
[Display Conditions]
[Admin Setup] > [Time Setup] >
[Setting method] is set to [Auto Setup].
xxx.xxx.xxx.xxx Sets the SNTP server (secondary).
[Display Conditions]
[Admin Setup] > [Time Setup] >
[Setting method] is set to [Auto Setup].
01/01/2000
Set current date and time.
00:00 Display format follows the settings selected
~ in Date Format.
01/01/2009
00:00
~
12/31/2091
23:59
Sets the behavior of [Auto Power Off].
Enable
Auto Config [Enable]: Changes to the off mode even
Disable when the network is connected.
[Auto Config]: Does not change to the
off mode when the network is connected.
Changes to the off mode even when the USB
cable is connected.
[Disable]: Disables the off mode transition
by the elapsed time.
inch/millimeter Specifies the unit for custom paper sizes.
A4/Letter
Sets the default paper size.
Auto Sets the incoming buffer size.
0.5 megabyte
1 megabyte
2 megabyte
4 megabyte
8 megabyte
16 megabyte
32 megabyte
Auto Sets the resource saving area size.
Off
0.5 megabyte
1 megabyte
2 megabyte
4 megabyte
8 megabyte
16 megabyte
32 megabyte
Execute Initialize the flash memory.
Execute Initializes the SD Card to the factory default
setting.
PCL
Formats a specified partition.
Common
PS
Execute It features of the deletion of all the data
stored in the SD Card not to be recovered
them.
- 44 -
Explanation