Auto Tray Switching - Oki Pro8432WT User Manual

For OS X PS Printer Driver
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3 Select [Paper Feed] from the panel
menu.
4 Select [All pages From] and select
[Auto Select].
5
Configure other settings if necessary and
then start printing.
Memo
● If setting details are not displayed in the print dialog
box for OS X, click [Show Details] at the bottom of the
dialog box.

Auto Tray Switching

You can switch paper feed trays automatically.
When a tray runs out of paper while printing, the
printer locates another tray with the same size
of paper on the printer driver and begins feeding
paper from that tray.
This function is effective for large print jobs of
the same paper size.
First, set on the operator panel for the MP tray
to be available for auto selection. Then, set the
auto switching of the tray with the printer driver.
Note
● Make sure to set the same values (paper size, media type,
media weight) for each tray used for auto tray switching.
Available paper size differs depending on each tray. For
details, refer to the User's Manual (Setup).
Memo
● In the default settings, the [Tray Usage] is [Do Not
Use]. When at default settings, the MP tray is not
supported by the auto tray switching function.
1 Press the <Fn> key.
Memo
● When a printer is in the power saving mode, press
the <POWER SAVE> button to restore from the
mode.
2
Press the <9> and <5> on the numeric
keypad and then press the <ENTER>
button.
3
Press the scroll button
[Normal Tray] and then press the
<ENTER> button.
4 Press the <ON LINE> button to exit the
menu mode.
5
Configure the paper source setting on
the print dialog.
For Windows PS Printer Driver
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3
Click [Preferences] or [Properties].
4
Click [Advanced] on the [Layout] tab.
5 Click [Tray Switch] under [Printer
Features] and select [On] from the
drop-down list.
- 21 -
1
to select