Emphasizing Fine Lines; Auto Tray Selection - Oki C822n User Manual

Emphasizing Fine Lines

1
You can print fine lines and small characters
clearer.
Memo
● This function is turned on by default.
● With some applications, if this function is turned on,
the spaces in bar codes may become too narrow. If this
happens, turn off this function.
For Windows
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3
Click [Preferences] or [Properties].
4
Select the [Job Options] tab.
5
Click the [Advanced].
6
Set the [Adjust ultra fine lines] to
[On] and then click [OK].
7
Configure other settings if necessary and
then start printing.

Auto Tray Selection

You can set in the printer driver to automatically
switch paper feed trays with the same size of
paper loaded.
First, set on the operator panel for the MP tray
to be available for auto selection. Then, set the
auto selection of the tray with the printer driver.
Note
● Make sure to set a paper size for Tray1, Tray2 (option)
and MP tray. Available paper size differs depending on
each tray. For details, refer to the User's Manual (Setup).
Memo
● In the default settings, the [Tray Usage] is [Do Not
Use]. When at default settings, the MP tray is not
supported by the auto tray switching function.
1
Press the <Fn> key.
Memo
● When a printer is in the power saving mode, press
the <POWER SAVE> button to restore from the
mode.
2
Enter <9> and <5> using the ten-key
pad and press the <ENTER> button.
3
Press the scroll button
[When Mismatching] and then press
the <ENTER> button.
4
Press the <ON LINE> button to exit the
menu mode.
5
Specify a paper tray in the printer driver
and start printing.
For Windows
1
Open the file you want to print.
2
From the [File] menu, select [Print].
3
Click [Preferences] or [Properties].
4
On the [Setup] tab, select [Auto] from
[Source].
5
Configure other settings if necessary and
then start printing.
- 20 -
to select