Assembly Instructions - BLADEZ 9.9T Owner's Manual

Two persons are required to
complete the assembly steps.
(Caution!! Please follow the
assembly steps below exactly to
avoid injury.)
1. Lift up the handrail frame and the
upright tubes as shown in the
drawing until you hear a "click"
sound.
Note: To avoid unexpected accident,
always assemble the treadmill with
an assistant, do not assemble by
yourself.
2. Raise up the handrail frame in the
direction that the drawing shows,
until hearing a "click" sound.
Note 1: To avoid unexpected
accident, always assemble the
treadmill with an assistant, do not
assemble by yourself.
Note 2: Tighten the pop-pin knobs
firmly. Please pay extra attention
when tightening the pop-pin knobs
below. One hand must pull the
upright tube and then tighten the
pop-pin knob with the other hand.
Note 3: After tightening the lower
knobs, the gap should be around
5mm.
3. Attach handrail covers (B, C) as
the drawing shows.
BH North America Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610

ASSEMBLY INSTRUCTIONS

www.bladezfitness.com
6