Assembly Instructions - BLADEZ Discover Owner's Manual

Note: Assembly of this unit should take two persons about 30 minutes to properly assemble.
Do not place the treadmill on its side at any time during the assembly or transport.
Doing so will render the safety release mechanism inoperable and may lead to personal injury.
As this is a QuickFit system
work is minimized and easy.
Step 1:
Remove the main section of the treadmill from the box
and place it on a level floor.
Step 2:
Push up the console portion of the treadmill rotating
it to an upright position. Tighten the hex screws (c)
as shown if figure B.
Step 3:
Pivot the display into the proper position. Insert and tighten
the screws(a & b) shown on figure C to secure the uprights.
Step 4:
Install the siderail covers (D,E) and secure using the plastic
washers(i) and philips screws(h) provided. See figure D for
details.
Step 5:
Install the handrail covers (B,C). See figure E for
details.

ASSEMBLY INSTRUCTIONS

( )
,the assembly
11
A
c
c
a
b
b
a
h
h
E
i
h
D
h
h
i
i
C
B
Fig. A
Fig. B
Fig. C
h
i
Fig. D
Fig. E