This will allow you to get a full understanding of all the features your BLADEZ’ machine provides. If you have any questions or concerns, please contact the BLADEZ Corporation or any authorized BLADEZ FITNESS distributors in your area.
Page 3
Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided to you. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. MILAN TREADMILL...
ASSEMBLY Please read through these assembly instructions and familiarize yourself with each part of the treadmill prior to commencing assembly. Always use two (2) people when moving and or assembling the treadmill WARRANTY MILAN TREADMILL...
Page 7
Please pay extra attention not to turn any pivot points to prevent fingers from being pinched 2. Lift up the upright tube as the arrows show Warning: Please be careful for pinch points Fix upright tubes with 4 M8*50mm bolts MILAN TREADMILL...
Page 8
2 M8*20mm bolt on each side. Warning: be careful to not pinch any wiring Please fix tighten the bolts 4. Place the right and left upright lateral covers into upright tubes and fix on the base frame as the drawing shows MILAN TREADMILL...
Page 9
ASSEMBLY Continued 5. Fix the upright lateral covers with 4 ST4*15 screws on the base frame For additional information on the operation of the computer console, please contact Bladez Fitness. Enjoy your new MILAN treadmill by Bladez Fitness MILAN TREADMILL...
Page 11
8) Pull the safety key off the console if you need to stop quickly. Reinsert and press START to restart 9) Press STOP once you have completed your workout 10) Remove the safety key from the treadmill when not in use MILAN TREADMILL...
Page 12
10) Pull the safety key off the console if you need to stop quickly. Reinsert and press START to restart 11) Once you have reached your goal, the LCD display will show END and the unit will beep 10 times 12) Remove the safety key from the treadmill when not in use MILAN TREADMILL...
Page 14
Programs 1 through 12 Segments 0 through 15 (16 total segments) Speed mph Incline % NO speed Incline speed incline speed incline speed incline speed incline speed incline NO speed incline speed incline speed incline speed incline speed incline speed incline MILAN TREADMILL...
Page 15
LABOR – 1 Year BLADEZ Fitness shall cover the labor cost for the repair of the device for a period of one year from the date of original purchase, as long as the device remains in the possession of the original owner.
This warranty gives you specific legal rights and your rights may vary from state to state. WARRANTY REGISTRATION Your warranty card must be completed and sent to BLADEZ FITNESS before a warranty claim can be processed. MILAN TREADMILL...
Need help?
Do you have a question about the MILAN and is the answer not in the manual?
Questions and answers