Maintenance - Astoria STORM BARISTA ATTITUDE SAEP 2GR Use And Maintenance Manual

Maintenance

8.3
8.3.1 Inspections
In this section, you can monitor all of the machine's
operating data in real time, such as:
• The temperature of the control unit board;
• The heating unit temperature;
• The cup warmer temperature;
• The pump pressure;
• The heating unit pressure probe;
• The heating unit pressure;
• The flow meter inlet;
• The minimum level in the heating unit;
• The maximum level in the heating unit;
• The ambient humidity;
• The temperature of the group heating units;
• The temperature of the groups;
• The flow rate of the groups;
• The pressure switch of the groups.
To go from one page to another, select the
button.
TECHNICIANS manual
SERVICE SETTINGS
Service
Maintenance Washes
parameters
Coffee
View delivery Language
temperatures
Recipe library Water filters Parameter list
Menu Energy saving
Software
calibration & cloud
MAINTENANCE
User buttons
Inspections Counters
activation
Maintenance Maintenance Warning
threshold report history
Heating unit Change serial Restore
efficiency number parameters
actuator tests
1/7 INSPECTIONS
Power card temperature 39.1°C
heating unit temperature 122.4°C
autosteamer temperature ----
cup warmer temperature 49.3 °C
2/7 INSPECTIONS
pump pressure 3.64 bar
heating unit pressure probe 1.24 bar
operation heating unit pressure 1.24 bar
inlet flow meter 257 Pulses
3/7 INSPECTIONS
minimum heating unit level 1
maximum heating unit level 1
ambient humidity 34%
group heating unit temperature 93.2°C
37 92
of