Pressure Equipment Safety Notes - Siemens SITRANS F Series Quick Start Manual

Ip65 nema 4x & ip66 nema 7 7me362 liquid flowmeter
Hide thumbs Also See for SITRANS F Series:
Table of Contents

Advertisement

Available languages

Available languages

Transmitter Markings and Explanations
● IP66 – Ingress protection against solid bodies, rating of dust-tight and against liquid, rating
Sensor Markings and Explanations
● IP65 – Ingress protection against solid bodies, rating of dust-tight and against liquid, rating
1.3

Pressure Equipment Safety Notes

HOT SURFACE - External Sensor temperature can exceed 93°C (200°F).
Exceeding rated pressure identified as MAOP may cause Sensor failure.
User is responsible for ensuring that all Sensor ports are properly sealed.
It is the responsibility of the user to account for any potential confusion or misuse of gas
equipment with liquid equipment or visa versa.
Materials of construction are chosen based on their chemical compatibility (or inertness) for
general purposes. For exposure to specific environments, check with chemical compatibility
charts before installing.
FUT1010 IP65 NEMA 4X & IP66 NEMA 7 Liquid Quick Start
Operating Instructions, 6/2010, A5E02639182A Revision 02
II (1) G [Ex ia] IIC– Transmitter located in the non-hazardous area with intrinsically safe
circuits of category Ex ia, which can be connected to Category 1 Sensors for use in
potentially explosive atmosphere containing gases
II 3 (1) G Ex nC [ia] IIC T5 (Tamb = 0° To + 60°C) – Category 3 Transmitter located in
Zone 2 hazardous area with intrinsically safe circuits of category Ex ia, which can be
connected to Category 1 Sensors in Zone 0 for use in potentially explosive atmosphere
containing gases
II 2 (1) G Ex d [ia IIC] IIB T5 (Tamb = 0° To + 50°C) – Category 2 Transmitter located
in Zone 1 hazardous area with intrinsically safe circuits of category Ex ia, which can be
connected to Category 1 Sensors for use in potentially explosive atmosphere containing
gases
of heavy seas
II 1 G Ex ia IIC T5 – Category 1 Sensors located in Zone 1 hazardous area with
intrinsically safe circuits of category Ex ia for use in potentially explosive atmosphere
containing gases
of water jets
WARNING
WARNING
WARNING
WARNING
WARNING
1.3 Pressure Equipment Safety Notes
Introduction
9

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Sitrans fut1010

Table of Contents