Setting Boot Screen Callsign - XIEGU G90 Operation Manual

G90 boot screen call sign setting - CALL SIGN EDITOR
The G90 can display your call sign on the boot-up screen.
Operating method：
1. Press and hold the [VM] button to enter the text editor.
2. At the bottom of the screen is the character selection area. Rotate the main knob to select the desired character. Short press the
main knob inwards to select the character.
3. Press the button corresponding to BACK to delete the last character; press the button corresponding to QUIT to exit the editor
interface; press the button corresponding to SAVE to save and exit the editor interface.
4. When you turn it on again, the edited text information will be displayed on the screen.
The relationship between functions and buttons:
SAVE: Corresponding to the [ PRE ] button
BACK: Corresponding to the [ NB ] button
QUIT: Corresponds to the [VM] button
LCD Display
30