Nivellieren Des Heizofens; Verschiedene Anschlüsse; Stromanschluss; Erdung - Palazzetti Ecofire Series Instructions For Use And Maintenance Manual

Eco-friendly combustion stove
Hide thumbs Also See for Ecofire Series:
Table of Contents

Advertisement

6
INSTALLATION
GB
The installation must be carried out by qualified
personnel in compliance with the UNI 10683-05.
6.1
LEVELLING THE STOVE
The stove must be levelled by turning the adjustment
feet (Fig. 6.1-1), with the aid of a spirit level.
A B = Spirit Level
6.2
CONNECTION TO SYSTEMS
6.2.1 Electrical connection
Simply connect the stove to the electricity mains with
the plug supplied.
The electrical connection (plug) must be easy to
access also after the stove has been installed.
If the power lead is damaged it must be replaced
by the technical assistance service or a qualified
electrician to prevent all risks.
6.2.1.1 Earthing
O
The system must be earthed and fitted with a circuit
breaker as provided for by current laws (Fig. 6.2.1.1-
1).
The flue must have its own earth connection.
6.2.1.2 Starting
To start, press the switch down, "I", (On) (Fig. 6.2.1.2-
1).
ECOFIRE ALICE / BARBARA
6
INSTALLATION
Die Installation muss von qualifiziertem Fachpersonal
durchgeführt werden den in den Normen UNI 10683-
05.
6.1

NIVELLIEREN DES HEIZOFENS

Der Heizofen muss unter Einsatz einer Wasserwaage
anhand der Stellfüße nivelliert werden (Fig. 6.1-1).
A B = Wasserwaage
6.2
VERSCHIEDENE ANSCHLÜSSE

6.2.1 Stromanschluss

Den Heizofen einfach mit dem Stecker an die häusliche
Stromleitung anschließen.
Der Elektroanschluss (Stecker) muss auch nach der
Installation des Heizofens mühelos zugänglich
sein.
Sollte das Netzkabel beschädigt sein, muss es vom
Personal des Technischen Kundendiensts oder von
einem Fachmann ersetzt werden, um jedes Risiko
zu vermeiden.

6.2.1.1 Erdung

O
Die Anlage muss obligatorisch mit einer Erdung und
einem Schutzschalter gemäß den gültigen
Bestimmungen ausgestattet sein (Abb. 6.2.1.1-1).
Die Rauchabzugsleitung muss direkt mit dem
Fußboden verbunden sein.

6.2.1.2 Start

Für die Inbetriebnahme den Schalter auf „I" (ein) stellen
(Abb. 6.2.1.2-1).
cod. 004770900 - 10/2010
D
35/96

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecofire barbaraEcofire alice

Table of Contents