Turn On The Linea Pro; Scan Barcodes - Infinite Peripherals Linea Pro 7 User Manual

USER MANUAL- LINEA PRO 7
Turn on the Linea Pro 7 Using Dual Buttons
The dual-purpose scan button powers on the unit and scans barcodes.
1. With the unit turned off, press the scan button until you hear a
single beep. The unit is ready to use.
2. Press a scan button a second time to activate the scanner for
normal barcode scanner.
Note:
If the Linea Pro 7 is idling for an extended period of time, the
power turns off automatically to preserve the charge on the
internal battery pack.

Scan Barcodes

The Linea Pro 7 supports scanning 1D/2D barcode symbols. The effective reading distance of the barcode reader varies based on the barcode size.
1. Press and hold the scan button to activate the Linea Pro 7.
2. Position the scan head as close to the barcode label as possible
so the scan line crosses both ends of the barcode.
3. Slowly pull the unit back, increasing the distance between the
barcode and scan head, until the barcode is read by the scanner.
Data is displayed on the iOS device.
Scan Button
(Located on each side)
15-20 cm
11