Explanation Of Symbols On The Monitor - EDAN iM3 User Manual

Vital signs monitor
Hide thumbs Also See for iM3:
Table of Contents

Advertisement

Vital Signs Monitor User Manual
11
Do not touch the touch screen with a sharp object.
12
A ventilated environment is required for monitor installation. Do not block up the
ventilation grille at the back of the device.
13
The device must be connected to the ground to avoid signal interference.
14
To protect eyes from damage, don't look directly at supplementary LED for long time.
15
Poor connection might be caused by frequently plugging and unplugging the power
cord. Check the power cord regularly and replace it in time.
NOTE:
1
Position the device in a location where the operator can easily see the screen and
access the operating controls.
2
The monitor can only be used on one patient at a time.
3
If the monitor gets damp or liquid pours on the monitor, please contact the service
personnel of EDAN.
4
This monitor is not a device for treatment purposes.
5
The pictures and interfaces in this manual are for reference only.
6
Regular preventive maintenance should be carried out every two years. You are
responsible for any requirements specific to your country.
7
The monitor may not be compatible with all models of USB flash drives. Use the USB
flash drives that are recommended by EDAN.

1.3 Explanation of Symbols on the Monitor

1
2
3
4
5
CAUTION
DEFIBRILLATION-PROOF TYPE BF APPLIED PART
TYPE BF APPLIED PART
Caution
MR Unsafe - Keep away from magnetic resonance
imaging (MRI) equipment
Equipotential grounding
- 6 -
Intended Use and Safety Guidance

Advertisement

Table of Contents
loading

Table of Contents