7. Basic Operation
When powered on, the VP6800 boots automatically and illuminates within about five seconds. For
development purposes, use cable P/N 80159217-001. Plug the 12-pin Molex connector into the
back of the VP6800, and supply 5VDC 2A power (via cannon connector at the powered DB9
connection) using an ID TECH P/N AC0005R-24 or equivalent power supply. Optionally also
connect a standard Ethernet cable between the RJ45 ports on the back of the VP6800 and the
network port of the host system.
8. Installation
The sections below describe ViVOpay VP6800 installation.
8.1 Parts List for Development
Verify that you have the following hardware for the installation of the ViVOpay VP6800:
• Cable 80159217-001
Page | 9