Security Guide; Decommissioning Sred Devices - ID Tech ViVOpay VP6800 User Manual

Hide thumbs Also See for ViVOpay VP6800:
Table of Contents

Advertisement

8.8.2 Security Guide

The VP6800 is an unattended device. Contact your ID TECH representative or send an e-mail to
support@idtechproducts.com
recommend you conduct daily checks of the device as follows:
Check the tamper evidence physical seals, to make sure they are intact.
Power on the device, check the beeper, and the display message, making sure there is no
tamper indication (see earlier chart for beeper interpretation). Also read the firmware
version, making sure the firmware version is correct.
Check the touchpad, to make sure there is no physical overlay on the touchpad.
Check the appearance of device, to make sure there isn't any hole on the device or
suspicious object around the ICC card slot.
Check the MSR (magnetic stripe) slot, to make sure there is no alteration of the device.

9. Decommissioning SRED Devices

All PCI devices require proper decommissioning prior to device disposal in order to ensure the
protection of all sensitive financial card data. For instructions on decommissioning your device,
see
Decommissioning of SRED Devices
if you have any questions involving the product's daily use. We
on the ID TECH Knowledge Base.
Page | 15

Advertisement

Table of Contents
loading

Table of Contents