SawStop RT-LFT Owner's Manual page 21

The power cord clamp (2.7) can be moved to the other side panel if desired (in which case you would
switch the power cord port cover (2.12) and power cord clamp (2.7)). The adjustable vent (2.8), dust
port splitter (2.13), and dust port cover (2.19) can each be removed and re-installed in any of the three
large square holes in the side and rear panels.
For Benchtop Router Table (RT-BT) Installation: The dust port splitter must be installed on the rear
panel, since the rear panel of the benchtop stand has a cutout to provide clearance for the dust port
splitter.
i
For Standalone (RT-FS or RT-PHFS) or TGP2 In-Line Router Table (RT-TGP) between-rails installation,
panels can be configured to the user preference.
For TGP2 In-Line Router Table (RT-TGP) left of left wing installation: Be sure the dust port splitter will
not interfere with the motor housing cover on your saw. If the dust port splitter will interfere with the
motor housing cover, locate the splitter on one of the side panels, and move either the dust port cover
or adjustable vent to the rear panel.
To relocate the dust port cover, adjustable vent, and/or dust port splitter, remove the four truss head
Phillips screws (2.6) securing the dust port cover, adjustable vent, and/or dust port splitter (if it is
already installed). Then, move the components to the desired locations and secure them using the
same screws.
If you turned your router table over to
5
install the Downdraft Dust Collection
Box, turn it back over at this point
and install it on your stand or saw,
following the instructions in your
router table manual. Attach the dust
port splitter (2.13) to a side panel (2.2)
or the rear panel (2.1) using four truss
head Phillips screws (2.6).
Follow the instructions in your router
6
table manual to install your fence
assembly on the router table. (You can
download copies of your manuals at
www.sawstop.com.)
2.2
For this step, please refer to your
router table and fence manual.
RT-LFT/RT-DCB OWNER'S MANUAL
2.1
2.6
2.13
16