Parameters - TECO E510s Series Instruction Manual

4.2 Parameters

Parameter group
Group 00
Group 01
Group 02
Group 03
Group 04
Group 05
Group 06
Group 07
Group 08
Group 09
Group 10
Group 11
Group 12
Group 13
Group 14
Group 15
Group 16
Group 17
Group 18
Group 20
Group 21
Group 22
Group 23
*1
Parameters can be changed during run operation.
*2
Reserved
*3
Parameter will not reset to default during a factory reset (initialization).
*4
Read-only parameter
*5
Parameter will be displayed in being coupled with the option card.
*6
Parameter will be displayed only in LED keypad.
*7 Parameter will be displayed only in LCD keypad.
*8 When 13-08 setting is changed, the value will be also changed.
Basic Parameters
V/F Control Parameters
IM Motor Parameters
External Digital Input and Output Parameters
External Analog Input and Output Parameters
Multi-Speed Parameters
Automatic Program Operation Parameters
Start /Stop Parameters
Protection Parameters
Communication Parameters
PID Parameters
Auxiliary Parameters
Monitoring Parameters
Maintenance Parameters
PLC Parameters
PLC Monitoring Parameters
LCD Parameters
Automatic Tuning Parameters
Slip Compensation Parameters
Speed Control Parameters
Torque And Position Control Parameters
PM Motor Parameters
Parameter Attribute
4-16
Group Name
PM & HAVC