Section 15
Logic
15.3.2
Application
Group alarm logic function ALMCALH is used to route alarm signals to different LEDs and/or
output contacts on the IED.
ALMCALH output signal and the physical outputs allows the user to adapt the alarm signal to
physical tripping outputs according to the specific application needs.
15.3.3
Setting guidelines
Operation : On or Off
15.4
Logic for group alarm WRNCALH
15.4.1
Logic for group warning WRNCALH
15.4.1.1
Identification
Function description
Logic for group warning
15.4.1.2
Application
Group warning logic function WRNCALH is used to route warning signals to LEDs and/or
output contacts on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to adapt the
warning signal to physical tripping outputs according to the specific application needs.
15.4.1.3
Setting guidelines
OperationOn or Off
15.5
Logic for group indication INDCALH
15.5.1
Logic for group indication INDCALH
15.5.1.1
Identification
Function description
Logic for group indication
15.5.1.2
Application
Group indication logic function INDCALH is used to route indication signals to different LEDs
and/or output contacts on the IED.
362
IEC 61850
IEC 60617
identification
identification
WRNCALH
-
IEC 61850
IEC 60617
identification
identification
INDCALH
-
1MRK 511 358-UEN A
GUID-70B268A9-B248-422D-9896-89FECFF80B75 v1
GUID-0BDD898A-360B-4443-A5CF-7619C80A17F4 v2
GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v3
GUID-3EBD3D5B-F506-4557-88D7-DFC0BD21C690 v3
ANSI/IEEE C37.2
device number
-
GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1
GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v3
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v3
ANSI/IEEE C37.2
device number
-
GUID-9BAD30FB-4B75-4E14-82A8-6A59B09FA6EA v1
Application manual