Table of Contents
Advertisement
Alarm devices in the FDnet
7
Sounder base FDSB29x
Base attachment humid FDB293
Base attachment wet FDB295
Designation plate DBZ1193A
Protective cage DBZ1194
DBZ1190-AA micro terminal and DBZ1190-AB connection terminal
66 | 152
●
For achieving a higher protection category
●
For mounting in wet or humid environments
●
Required when using detector heating unit FDBH291
●
Required when using protective cage DBZ1194 or EMC-protective cage
FDBZ294
●
Mounted between detector base and ceiling
●
Detector base mounted quickly: The detector base simply clicks into place in
base attachment humid FDB293.
●
Base attachment wet with additional integrated rubber seal for mounting in wet
or humid environments
●
For achieving a higher protection category
●
For mounting in wet or humid environments
●
Required when using detector heating unit FDBH291
●
Required when using protective cage DBZ1194
●
Mounted between detector base and ceiling
●
Detector base mounted quickly: The detector base simply clicks into place in
base attachment wet FDB295.
●
For labeling with the location address
●
Can only be used with base attachment wet FDB295
●
To protect the point detector from damage
●
Can only be mounted in combination with the base attachment humid FDB293
or base attachment wet FDB295
●
Micro terminal DBZ1190-AA
–
Cable cross section up to max. 0.5 mm²
●
Connection terminal DBZ1190-AB
–
Cable cross section up to max. 2.5 mm²
–
For connecting two external alarm indicators or the cable shielding
008164_y_en_--
Hide quick links:
Advertisement
Table of Contents
