Siemens Sinteso FD20 Product Data page 108

Hide thumbs Also See for Sinteso FD20:
Table of Contents

Advertisement

Special detectors
10
SWING radio fire detection system
Neural radio fire detector FDOOT271
Detector base FDB271
108 | 152
Consistent response to a wide range of different fires
Dynamic analysis of the sensor signal in the detector
itself
Built-in diagnosis algorithms with automatic selftest
High degree of immunity to false alarms and
environmental influences
High-quality opto-electronic sensor system
Automatic compensation for soiling
Radio fire detector can be mounted anywhere in a radio
cell
Detector can be inserted and removed using the detector
exchanger tool up to a height of 8 meters
Functions:
4 danger levels:
Enable activation of differentiated measures and an
early warning in the case of incorrect application.
Selftest:
The detector performs a comprehensive selftest
periodically or on command.
Signal processing with ASAtechnology ('Advanced
Signal Analysis')
Special calculation procedures in the detector
processor enable optimum signal processing defined
for the detector. This ensures excellent interference
immunity and operational reliability.
Measurement compensation:
Ensures the detector demonstrates a virtually
identical level of sensitivity throughout the operating
period.
The integrated alarm indicator shows the alarm on site.
Supply:
The neural fire detector FDOOT271 is supplied with
power by a battery pack (AA lithium batteries). The
batteries must not be inserted until the time of
commissioning.
Base for radio fire detector FDOOT271.
Once the battery has been connected, the detector must
not be inserted into the base until the time of
commissioning.
008164_y_en_--

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents