Faq - TP-Link AC2600 MU-MIMO User Manual

FAQ

Q1. What should I do if I forget my wireless password?
The default wireless password is printed on the label of the router. If the password has
been altered:
1. Connect your computer to the router using an Ethernet cable.
2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
3. Go to Basic > Wireless
Q2. What should I do if I forget my web management password?
• If you are using a TP-Link ID to log in, click
then follow the instructions to reset it.
• Alternatively, press and hold the Reset button of the router until the Power LED binks
to reset it, and then visit
Note:
You'll need to reconfigure the router to surf the internet once the router is reset, and please mark down your new
password for future use.
Q3. What should I do if I cannot log in to the router's web management
page?
This can happen for a variety of reasons. Please try the methods below to log in again.
• Make sure your computer is connected to the router correctly and the corresponding
LED indicator(s) light up.
• Make sure the IP address of your computer is configured as
automatically and
• Make sure http://tplinkwifi.net
• Check your computer's settings:
1 ) Go to Start
status and tasks.
2 ) Click Internet Options
3 ) Click Connections
to retrieve or reset your wireless password.
http://tplinkwifi.net
Obtain DNS server address
or http://192.168.0.1
> Control Panel >
on the bottom left.
and select Never dial a
Forgot password
to create a new login password.
automatically.
is correctly entered.
Network and Internet, and click
connection.
on the login page and
Obtain an IP address
View network
86