Wds - TP-Link AC2600 MU-MIMO User Manual

Chapter 14
• AP Isolation Feature
connected to the network from interacting with each other, but still able to
access the internet, enable AP Isolation feature.
• Airtime Fairness Feature
each flow. The ATF traffic scheduler uses the per-destination airtime targets to
balance airtime usage across flow destinations.
• Multi-User MIMO Feature
available for 5GHz.
Note: To use this feature, you need to have a network adapter that supports Multi-User MIMO.

14. 11. 2. WDS

WDS (Wireless Distribution System) Bridging feature allows you to bridge a router with
an access point to extend the wireless network coverage. The access point should also
support WDS Bridging feature.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
3. Enable the WDS Bridging feature.
4. Click Survey to scan all available networks and select the network you want to bridge.
The SSID (network name) and MAC Address will be automatically populated. You can
also manually fill in these parameters.
5. Select a Security
the network to be bridged.
6. Click Save.
Note: You need to enable and configure the WDS Bridging feature for the access point as well.
7. Disable DHCP:
- If you want to confine and restrict all wireless devices
- This feature allows you to optimize the throughput of
- Enable to use Multi-User MIMO Feature. Only
System Tools > System
type and enter related parameters, which should be the same as
Parameters. Focus on
Manage the Router
WDS section.
83