Chapter 4
4 )
6to4 Tunnel:
connection type
your ISP uses 6to4 deployment for assigning address. Click Save.
5 )
Pass-Through (Bridge):
network deployment. No configuration is required for this type of connection.
Click
Save
and skip to step 6.
5. Configure LAN ports. Select the appropriate Address Type and Site Prefix Type
according to your ISP. Click Save.
Tips:
Click
on the management interface to know more about items.
An IPv4 internet connection type is a prerequisite for this
(Manually Set up Your Internet
Select this type if your ISP uses Pass-Through (Bridge)
Set Up Internet Connection
Connection). Select this type if
19