Use Quick Setup Wizard; Manually Set Up Your Internet Connection - TP-Link AC2600 MU-MIMO User Manual

Chapter 4
4. 1.

Use Quick Setup Wizard

The Quick Setup Wizard will guide you through the process to set up your router.
Tips:
If you need the IPv6 internet connection, please refer to the section of
Follow the steps below to set up your router.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Click Quick Setup
to connect your router to the internet.
3. To enjoy a more complete service from TP-Link (remote management, TP-Link DDNS,
etc.), log in with your TP-Link ID or click
instructions to bind the cloud router to your TP-Link ID.
Note:
• To learn more about the TP-Link Cloud service, please refer to the
• If you do not want to register a TP-Link ID now, you may click
• If you have changed the preset wireless network name (SSID) and wireless password during the Quick Setup process,
all your wireless devices must use the new SSID and password to connect to the router.
4. 2.

Manually Set up Your Internet Connection

In this part, you can check your current internet connection settings. You can also
modify the settings according to the service information provided by your ISP.
Follow the steps below to check or modify your internet connection settings.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Basic > Internet.
3. Select your internet connection type from the drop-down list.
on the top of the page. Then follow the step-by-step instructions
Set Up Internet Connection
Set Up an IPv6 Internet
Resigter Now to get one. Then follow the
TP-Link Cloud Service
Log In Later to proceed.
Connection.
section.
14