TP-Link AC2600 MU-MIMO User Manual page 93

of the root router is 192.168.0.1, the IP address of the extended router can be
192.168.0.2~192.168.0.254. We take 192.168.0.2 as example.)
2 ) Click Save.
Note: Log in to the web management page again if the IP address of the router is altered.
3. Survey the SSID to be bridged:
1 ) Go to Advanced
section. Enable the WDS Bridging feature.
2 ) Click Survey
to bridge. The SSID (network name) and MAC Address will be automatically
populated. You can also manually fill in these parameters.
3 ) Select a Security
as the network to be bridged.
4. Disable DHCP:
1 ) Go to Network
2 ) Deselect Enable DHCP Server
Now you can go to
WDS status is Run, it means WDS bridging is successfully built.
> System Tools
to scan all available networks and select the network you want
type and enter related parameters, which should be the same
> DHCP Server.
Advanced > Status
> System Parameters
and click Save.
> Wireless to check the WDS status. When the
and focus on the WDS
89