TP-Link AC2600 MU-MIMO User Manual page 19

Chapter 4
Note:
If you are unsure of what your connection type is, click
cables and connection information, you can also refer to the demonstrations in Step 4 to determine your connection
type.
4. Follow the instructions on the page to continue the configuration. Parameters on the
figures are just used for demonstration.
1 ) If you choose
Dynamic IP users are usually equipped with a cable TV or fiber cable.
2 ) If you choose
corresponding fields.
3 ) If you choose PPPoE, enter the
PPPoE users usually have DSL cable modems.
Auto
Dynamic IP, you need to select whether to clone the MAC address.
Static IP, enter the information provided by your ISP in the
username
Set Up Internet Connection
Detect. Since different connection types require different
and password provided by your ISP.
15