Table of Contents
Advertisement
Chapter 12
Note:
Before you enable
VPN
Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static
IP address for router's WAN port and synchronize your
3. In the
Client IP Address
leased to the devices by the PPTP VPN server.
4. Enter the
Username
5. Click Save.
•
Step 2. Configure PPTP VPN Connection on Your Remote Device
The remote device can use the Windows built-in PPTP software or a third-party PPTP
software to connect to PPTP Server. Here we use the
as an example.
1. Go to
Start
>
Control Panel
2. Select
Set up a new connection or
3. Select
Connect to a workplace
System Time
filed, enter the range of IP addresses (up to 10) that can be
and
Password
to authenticate clients to the PPTP VPN server.
>
Network and Internet
network.
and click Next.
with internet.
Windows built-in PPTP software
>
Network and Sharing
VPN Server
Center.
52
Hide quick links:
Advertisement
Table of Contents
