Faq - TP-Link AX1800 User Manual

FAQ

Q1. What should I do if I forget my wireless password?
The default wireless password is printed on the label of the device. If the password has
been changed:
1. Connect your computer to the controller using an Ethernet cable.
2. Visit http://tplinkwifi.net, and log in with the password you set for the controller.
3. Go to Basic > Wireless
Q2. What should I do if I forget my web management password?
• Press and hold the RESET button on the bottom of the controller for about 5 seconds,
and then visit http://tplinkwifi.net
Note: You'll need to reconfigure the controller to surf the internet once the controller is reset, and please mark down
your new password for future use.
Q3. What should I do if I cannot log in to the controller's web management
page?
This can happen for a variety of reasons. Please try the methods below to log in again.
• Make sure your computer is connected to the controller correctly and the
corresponding LED indicator(s) light up.
• Make sure the IP address of your computer is configured as
automatically and
• Make sure http://tplinkwifi.net
• Check your computer's settings:
1 ) Go to Start
status and tasks.
2 ) Click Internet Options
3 ) Click Connections
to retrieve or reset your wireless password.
to create a new login password.
Obtain DNS server address
or http://192.168.0.1
> Control Panel >
on the bottom left.
and select Never dial a
automatically.
is correctly entered.
Network and Internet, and click
connection.
Obtain an IP address
View network
88