Specify Wireless Settings - TP-Link AC2600 MU-MIMO User Manual

Chapter 13
6. Check the System Routing Table
static routing is set successfully.
Done!
Open a web browser on your PC. Enter the company server's IP address to visit the
company network.

13. 6. Specify Wireless Settings

The router's wireless network name (SSID) and password, and security option are preset
in the factory. The preset SSID and password can be found on the label of the router.
You can customize the wireless settings according to your needs.
Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the
router.
• To enable or disable the wireless function:
1. Go to Advanced >
2. The wireless radio is enabled by default. If you want to disable the wireless function of
the router, just uncheck the box for
settings will be invalid.
• To change the wireless network name (SSID) and wireless password:
1. Go to Basic > Wireless.
2. Create a new SSID in
the network in Password. The value is case-sensitive.
Note:
If you change the wireless settings with a wireless device, you will be disconnected when the settings are effective.
Please write down the new SSID and password for future use.
• To hide SSID:
1. Go to Basic > Wireless.
2. Select Hide SSID, and your SSID won't display when you scan for local wireless
networks on your wireless device and you need to manually join the network.
• To use the smart connect function
below. If you can find the entry you've set, the
Wireless > Wireless Settings.
Enable Wireless
Wireless Network Name (SSID)
Customize Your Network Settings
Radio. In this case, all the wireless
and customize the password for
64