Chapter 14
1 ) Go to
Network
2 ) Deselect
Enable DHCP Server
Now you can go to
Advanced
WDS status
is Run, it means WDS bridging is successfully built.
14. 11. 3. LEDs Control
The router's LEDs indicate router's activities and status. You can turn on or turn off the
LEDs either from the web management page or by pressing the LED button.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
3. Tick the
Night Mode
4. Specify a time period in the
this period.
5. Click Save.
14. 11. 4. DoS Protection Settings
DoS Protection can protect your home network against DoS attacks from flooding your
network with server requests.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
3. Go to
Advanced
>
4. Enter a value between 5 and 7200 to trigger the protection immediately when the
number of packets exceeds the preset threshold value.
>
DHCP
Server.
and click Save.
>
Status
>
System Tools
>
System
checkbox.
LED Off Time
Security
>
Settings
to enable Dos Protection.
System Tools
>
System
Wireless
to check the WDS status. When the
Parameters. Focus on
as needed, and the LEDs will be off during
Parameters.
Manage the Router
LED
section.
84